Atlas Signs and Plaques-510 Enterprise Dr, Lake Mills, WI 53551 — Materials & Muse | Boats and Yacht Catalog

Atlas Signs and Plaques-510 Enterprise Dr, Lake Mills, WI 53551 — Materials & Muse

20 мая 2014 | Author: | No comments yet »
Rodman 30

Materials Muse

How We Make ’em

The Signs and Plaques that we create are not castings from a foundry.

Atlas Signs and Plaques have a base of modern 30 pound High Density Urethane (HDU) sign board. This is a product that was developed for the aerospace industry and has been used for signage for over 40 years.

We coat our HDU signs and plaques with a cold applied, real metal coating that is used thoughout the world. It is a well-proven, tough, and beautiful coating that gives the look of cast metal without limitations.

Our Signs and Plaques are very durable, but will not stand up to repeated abuse. If you wish to embed a plaque in the ground, hit it with a mower, or look at it in 500 years, you should order a foundry-cast plaque. Expect to pay 4-5 times as much as the affordable plaques we create using our proven methods.

When you receive your order, you will notice that it is lighter weight. Since it is HDU with a thin metal coating, it is light and easy to hang on any wall without fear of testing the building’s structural integrity.

We have our work, outside, at the U.S. Coast Academy and at locations over the world. You will even see our accomplishments at the new United States Capitol Visitor Center in Washington which has metal coated HDU in highly visible locations.

In fact, you have probably observed metal coated HDU, but were unaware that you weren’t looking at a foundry casting. Bottom line is architects and designers realize this as a well tested, and well accepted process, and use it without hesitation at some of the worlds most prestigious properties.

With a Sign or Plaque from Atlas, you will receive a quality product with the look and many of the characteristics of a foundry cast piece. You will have a truly custom product that is Made In the USA using American materials and labor. You will receive exceptional customer care from the very owners and craftspersons that are creating your selection. We want you to be thrilled with

your purchase!

Materials We Use

The Substrate (Base Material) of our Sgns:

Atlas Signs and Plaques uses 30 pound High Density Polyurethane (HDU). HDU has been in use for over 50 years and was originally designed for insulation in aircraft. It is currently used for insulation of homes, model making, boat building and more specifically in the sign making industry.

Our HDU Board is Precision Board Plus®

The following is from their website:

— Closed Cell Structure- Won’t absorb anything

— Will not crack, rot or peel

— Precision Board Plus has been reformulated with eco-friendly, Green urethane components

— Meets flammability burn test requirements of ASTM D-1692-74, Far 25.853, Mil-P-26514 ASTM D635

— Totally inert and contains no VOC’s, no carcinogens and is non-toxic

— Assists in meeting LEED requirements for obtaining USGBC and ICC 700-2008 building credits


The HDU Board is becoming a replacement for the more traditional cedar signs that would be carved or blasted with abrasives. However, the sign board will not split or warp, has no water absorption, so it won’t rot, meaning no insect attacks, and the artistic advantages are limitless.

The Metal Coatings:

Rodman 1040 Flybridge boat

The metal coating is not paint, it is real metal sprayed on to the HDU surface and is comprised of up to 75% real metal. The metal is unaffected by UV exposure, rain, sleet and snow. If left without a clear coat it will tarnish because it is real metal.

Sprayed metal has been proven for over 20 years. These are cold-applied (meaning they wont melt things) REAL METAL coatings that allow a layer of metal to be applied over almost any substrate (surface). The incredible results look, feel and act just like hot foundry cast metal but without the weight and expense. Suitable substrates include, but not limited to: laminate, melamine, wood, plastic, gypsum, fiberglass, ceramics, concrete, foam, porcelain, glass, metal, and of course, HDU.

The Clearcoats:

We use an extremely high-quality, marine grade, clear coating on every sign or plaque unless the client specifies otherwise. Marine Grade means that the coating is designed to stand up to harsh coastal salt spray environments.

The lacquer is specifically designed to protect metal surfaces in extreme exterior environments. The manufacturer states that it should give satisfactory exterior protection for at least ten years under normal conditions. Considerably longer life is expected. Our experience has been very favorable with this fine and expensive product.

Enamels:

The enamels on our signs are from 1-Shot®. These are the premiere enamels used in sign making for over 50 years. They are for interior and exterior uses.

Learn More

How We Make Them

FAQ’S — Frequently Asked Questions

Installing — Options for you to choose, With pictures and working on more video

Testimonials — See what others are saying

What Finish — Trying to decide the metal you like. Here you can find more detail.

Rodman 1040 Flybridge boat
Rodman 1040 Flybridge boat
Rodman 11.20 boat
Rodman Muse 50 boat
Rodman Muse 74 boat
Rodman Muse 74 boat
Rodman Muse 74 boat

Interesting Articles

Here you can write a commentary on the recording "Atlas Signs and Plaques-510 Enterprise Dr, Lake Mills, WI 53551 — Materials & Muse".

* Required fields
All the reviews are moderated.
Twitter-news
Our partners
Follow us
Contact us
Our contacts

dima911@gmail.com

Born in the USSR

423360519

About this site

For all questions about advertising, please contact listed on the site.


Boats and Yacht catalog with specifications, pictures, ratings, reviews and discusssions about Boats and Yacht